Aritech ADVISOR CD 7203 Manual de usuario descargar pdf (Pagina 19)

Manager Manual for CD72/95/15003 Page 19

ARMING VIA THE KEY SWITCH

(full arming or partguard)

A key switch is a mechanical switch with which the system can be armed and disarmed. No codes need to be

used.

In the event of a fault or an alarm, the information appears directly on the display.

1. Go to the key switch. Check whether the “System OK” LED

is on. If this LED is not on, check the keypad for a fault.

If a fault appears in the display, see the list of messages on

page Error! Bookmark not defined.. Otherwise the

message ‘System Off’ or the time and date will be

displayed.

Area 1 Disarmed

2. Arm the system by turning the key switch to the ON position.

If you cannot arm because there are open zones, the

message ‘Open Zone(s)’ automatically appears in the

display. All the open zones preventing arming are then

displayed.

Open Zone(s)

In this example zone 3, the hall, is not yet closed. Check

this zone or use a code to inhibit this zone (see page 20th).

003 Hall

When all the zones are closed, you can return to the key

switch.

All Closed

3. Turn the key switch to the OFF position if your key switch

has a separate position for arming and disarming.

OFF

The “System OK” LED is now on. If this is not the case,

there is a fault in the system. The fault is reported in the

display of the keypad. If necessary, warn the manager or the

installer.

4. The system can now arm - turn the key switch to the ON

position.

The beeper begins to beep to indicate that the exit time has

begun. Leave now.

Beeep

The “System ON” LED is now on to indicate that the

system is armed.

‘Area 1 armed’ or ‘Area 1 Partguard’ will be displayed.

Area 1 armed

Technical Manuals Online! - http://www.tech-man.com

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 107 108

Sin comentarios

Aritech ADVISOR CD 7203 Manual de usuario Pagina 19