Aritech ATS4000 Manual de servicio descargar pdf (Pagina 11)

ATS Designers Guide 11

1.2 User Interface

The user interface – manipulators, readers – is the only system element the user has

direct contact with. It serves to inform the user of the state of the system, allow taking

system control actions, and serves as a basic programming and maintenance channel for

the installing technician and programmer. The Advisor MASTER system offers a whole

range of RAS equipment, differing in appearance and functionality. It can also be made

compatible with equipment by other manufacturers, through the use of the ATS1170

Wiegand interface.

The unique function offered by the ATS system is alarm system control – arming and

disarming the alarm – through the readers and user cards. This is enabled by integrating

the access control and alarm systems.

Each piece of RAS equipment can be used in the ATS system to unidirectionally control

the access control passage. To ease the use of manipulators to control the doors, they

have been equipped with appropriate hardware features – lock control output, door

access switch (RTE) input – and software functions, through which access control on the

control panel level can be provided for budget sensitive applications.

RAS stations characteristics:

Alarm system control – Arming and disarming the system is the basic function of each RAS unit. Beyond

that, LCD-equipped units can serve to validate alarms, suspend zones, browse the event

log etc. – the common maintenance tasks in an alarm system. It is required that there is

at least one LCD manipulator present in the system configured for alarm system

maintenance.

Basic programming interface – LCD manipulators are the basic programming interface for the system. It is

strongly recommended that at least one LCD manipulator in the system is configured for

programming the system.

State LEDs – The RAS stations are equipped with LED diodes, which serve to display the state of the

system. Commonly there are 3 diodes:

Green – Power On

Orange – unit failure

Red – alert.;

In some equipment the red diode also displays the state of the RAS station area. In that

case the system state is encoded as follows:

Alert – The diode is pulsing;

Arming– The diode is lit continuously, if any of the station’s zones is armed

Disarmed–The diode is not lit, provided all zones of the RAS station are disarmed.

System bus– The RAS units are connected via the RS485 bus – addressed and queried (polled) by the

control panel. Each unit except ATS1190/92 is capable of terminating the bus.

Output– Dedicated for controlling the execution units for control panel managed access control.

Input– Dedicated for the exit button in access control.

Access control integration– Each unit can be used as an access control interface in control panel as well as

locally in the access control DGP. Access control carried out in the control panel can use

the dedicated inputs and outputs of the RAS station.

Additional equipment such as the ATS1340 – door connection box – as well as software

programming capabilities – blocking the door alarm zone etc., is typical for access

control.

CCTV integration – Control of a multiplexer – a DVMR/DTX recorder is accessible only through LCD

manipulators.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 82 83

Comentarios a estos manuales

Sin comentarios

Aritech ATS4000 Manual de servicio Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Aritech ATS4000