Aritech ATS3000 Guía de usuario descargar pdf (Pagina 40)

ATS2000/3000/4000/4500 Manager’s Guide

13. START AUTO DISARM TEST

Use this function to start the disarm test.

To start the disarm test

1. Access menu option 13.

The display shows:

2. Press:

[NEXT] to display the untested zones, or

0 and [ENTER] to cancel the arm test and move on to test completed/not completed

display.

3. If you have pressed [NEXT], the untested zones are displayed either one at a time or

as a list:

Zones displayed one at a time Zones displayed as a list

For example:

4. For either display, you can now:

Option Action

Display the description of the selected zone (when

displayed as a list of numbers only)

Enter the zone

number and press

[ENTER]

Display the remaining untested zones (if any) Press [NEXT]

Move on to the Camera Test or Test Completed/Not

Completed display.

Press [ENTER]

5. The display might shows information about cameras:

Press [ENTER] to return to the original option display.

Note that only cameras allocated to Area 1 are tested.

6. The testing automatically stops when:

• When all zones that are programmed to be tested during disarm test have been

tested, or

• The time allowed for the disarm test has expired.

The display then indicates if the test is completed or not.

Disarm Test, NEXT For Untested

"0"-Cancel::

Untested Disarm On 4. PIR In Office

NEXT or ENTER

Untested On 1, 2, 4.

Zone No:

All Cameras Have Tested Successfully

Press ENTER

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 70 71

Sin comentarios

Aritech ATS3000 Guía de usuario Pagina 40